Wisconsin § 192.53 - Railroad track clearance.

§ 192.53. Railroad track clearance.

192.53(1) (1) Except as otherwise provided in this section, no building or loading platform shall be constructed nor shall any addition to or reconstruction of an existing building or loading platform, excluding ordinary repairs necessary for maintenance, be made that shall have a horizontal clearance of less than 8 feet 6 inches between it and the center line of any railroad track. The same clearance shall be maintained between the center line of the railroad track and any material used in and about the construction of any such building or loading platform. 192.53(2) (2) Platforms at passenger stations used for loading and unloading passengers, baggage, mail and express may be constructed and maintained as follows: 192.53(2)(a) (a) A platform that is not higher than 4 inches above the top of the rail shall be not less than 4 feet 6 inches from the center line of the adjacent track. 192.53(2)(b) (b) A platform that is more than 4 inches but not higher than 8 inches above the top of the rail shall be not less than 5 feet one inch from the center line of the adjacent track. 192.53(2)(c) (c) A platform that is more than 8 inches but not higher than one foot 9 inches above the top of the rail shall be not less than 6 feet from the center line of the adjacent track. 192.53(2)(d) (d) A platform that is higher than one foot 9 inches above the top of the rail of a main track shall be not less than 8 feet from the center line of the main track. 192.53(3) (3) 192.53(3)(a) (a) Notwithstanding par. (b) , high platforms for handling baggage, mail, express and freight to and from cars on other than main tracks, where an unobstructed working space at ground level is maintained on the opposite side of the track from the platform, which have a face or edge at least 5 feet 8 inches from the center line of such track, which were in existence on July 1, 1949, may be maintained. 192.53(3)(b) (b) No platform of the type described in par. (a) may be constructed which provides a clearance of less than 6 feet 4 inches between the face or edge thereof and the center line of any such track or which is more than 5 feet above top of rail level. 192.53(4) (4) 192.53(4)(a) (a) Upon finding that any structure that is subject to the provisions of this section will not imperil life or limb, and that the public interest requires or permits the structure to be constructed or reconstructed otherwise than as permitted by the provisions of this section, the office may exempt the structure from the provisions of this section. 192.53(4)(b) (b) The office shall make the findings described in par. (a) only upon written application to it to exempt the construction or reconstruction of a structure from the requirements of this section, setting forth fully the grounds therefor, and only after public hearing held upon notice to all interested parties except that, if no objection is filed with the office within 20 days of the notice, the office may authorize the exemption without hearing. The office’s findings and order granting the exemption shall be in writing and shall contain complete provisions and requirements as to the horizontal clearance to be maintained in the construction or reconstruction. The structure shall be constructed or reconstructed only in compliance with the office’s order. 192.53(5) (5) 192.53(5)(a) (a) Except as otherwise provided in this section and subject to the power of the office to make exceptions to this section in a manner similar to the power given it in sub. (4) , no railroad or shipper may do any of the following: 192.53(5)(a)1. 1. Place or construct, within 8 feet 6 inches of the center line of any railroad track, any retaining walls, fences, signs, stand pipes, conveyors, or any other like obstruction, except railroad bridges, switch stands, mail cranes, coal, ice and water stations, intertrack fences and signals and other necessary interlocking mechanisms. 192.53(5)(a)2. 2. Permit, within 8 feet 6 inches of the center line of any railroad track, the accumulation of any rubbish, waste or material of any sort, except material used for repair or construction work by the railroad company. 192.53(5)(b) (b) The intent of this subsection is to afford proper clearance between railroad cars and obstructions and to promote the safety of railroad employees in switching cars. 192.53(6) (6) Any railroad or shipper to which this section applies, who violates any provision of this section or who fails, neglects or refuses to obey any lawful order made by the office under this section, shall forfeit not less than $100 nor more than $200. 192.53 History History: 1981 c. 347 s. 80 (1) ; 1993 a. 16 , 123 ; 1997 a. 254 ; 2005 a. 179 . 192.53 Cross-reference Cross-reference: See also ss. RR 2.14 , 2.15 , and 2.16 , Wis. adm. code.