Washington § 70.92.110 - Buildings and structures to which standards and specifications apply — Exemptions.

Full text of Washington Revised Code of Washington § 70.92.110 — Buildings and structures to which standards and specifications apply — Exemptions., with citation guidance and answers to common questions.

§ 70.92.110. Buildings and structures to which standards and specifications apply — Exemptions.

The standards and specifications adopted under this chapter shall, as provided in this section, apply to buildings, structures, or portions thereof used primarily for group A-1 through group U-1 occupancies, except for group R-3 occupancies, as defined in the Uniform Building Code, 1994 edition, published by the International Conference of Building Officials. All such buildings, structures, or portions thereof, which are constructed, substantially remodeled, or substantially rehabilitated after July 1, 1976, shall conform to the standards and specifications adopted under this chapter: PROVIDED, That the following buildings, structures, or portions thereof shall be exempt from this chapter:
(1) Buildings, structures, or portions thereof for which construction contracts have been awarded prior to July 1, 1976;
(2) Any building, structure, or portion thereof in respect to which the administrative authority deems, after considering all circumstances applying thereto, that full compliance is impracticable: PROVIDED, That, such a determination shall be made no later than at the time of issuance of the building permit for the construction, remodeling, or rehabilitation: PROVIDED FURTHER, That the board of appeals provided for in chapter 1 of the Uniform Building Code shall have jurisdiction to hear and decide appeals from any decision by the administrative authority regarding a waiver or failure to grant a waiver from compliance with the standards adopted pursuant to RCW 70.92.100 through 70.92.160. The provisions of the Uniform Building Code regarding the appeals process shall govern the appeals herein;
(3) Any building or structure used solely for dwelling purposes and which contains not more than two dwelling units;
(4) Any building or structure not used primarily for group A-1 through group U-1 occupancies, except for group R-3 occupancies, as set forth in the Uniform Building Code, 1994 edition, published by the International Conference of Building Officials; or
(5) Apartment houses with ten or fewer units.
[ 1995 c 343 s 3; 1989 c 14 s 9; 1975 1st ex.s. c 110 s 2.]

Source: official Washington text · Last verified 2026-08-27

Frequently Asked Questions About Washington § 70.92.110

What does Revised Code of Washington § 70.92.110 cover?

Section 70.92.110 ("Buildings and structures to which standards and specifications apply — Exemptions.") is part of the Revised Code of Washington, the codified statutory law of Washington. It sets out the legal rule or procedure described in the text above. Statutes are amended regularly, so always verify against the official source.

How do I cite Washington § 70.92.110?

A common citation format is "Revised Code of Washington § 70.92.110" (Washington). Legal writing may require the code abbreviation, section number, and year or edition. Match the style required by your court, professor, or publisher.

Is this the official text of Washington law?

No. This page is for research and education and may not include the most recent amendments. For official current law, check the Washington official source linked on this page or consult a licensed Washington attorney.

How does Washington § 70.92.110 apply to my situation?

Statutes are interpreted in context, and application depends on your specific facts. Only a licensed attorney in Washington can advise on how this section applies to you. Contact your state or local bar association for a referral.

Sources & Verification

Not legal advice. Verify against the official source and consult a licensed attorney in Washington.