Virginia § 46.2-1092 - Safety lap belts or a combination of lap belts and shoulder harnesses to be installed in certain motor vehicles
Full text of Virginia Code of Virginia § 46.2-1092 — Safety lap belts or a combination of lap belts and shoulder harnesses to be installed in certain motor vehicles, with citation guidance and answers to common questions.
§ 46.2-1092. Safety lap belts or a combination of lap belts and shoulder harnesses to be installed in certain motor vehicles
No passenger car or autocycle registered in the Commonwealth and manufactured for the year 1963 or for subsequent years shall be operated on the highways in the Commonwealth unless the front seats thereof are equipped with adult safety lap belts or a combination of lap belts and shoulder harnesses of types approved by the Superintendent.
Failure to use the safety lap belts or a combination of lap belts and shoulder harnesses after installation shall not be deemed to be negligence. Nor shall evidence of such nonuse of such devices be considered in mitigation of damages of whatever nature.
No motor vehicle registered in the Commonwealth and manufactured after January 1, 1968, shall be issued a safety inspection approval sticker if any lap belt, combination of lap belt and shoulder harness, or passive belt systems required to be installed at the time of manufacture by the federal Department of Transportation have been either removed from the motor vehicle or rendered inoperable.
No autocycle registered in the Commonwealth shall be issued a safety inspection sticker if any lap belt, combination of lap belt and shoulder harness, or passive belt systems required to be installed under this section have been either removed from the autocycle or rendered inoperable.
No passenger car, except convertibles, registered in the Commonwealth and manufactured on or after September 1, 1990, shall be operated on the highways in the Commonwealth unless the forward-facing rear outboard seats thereof are equipped with rear seat lap/shoulder belts of types required to be installed at the time of manufacture by the federal Department of Transportation.
No passenger car, including convertibles, registered in the Commonwealth and manufactured on or after September 1, 1991, shall be operated on the highways in the Commonwealth unless the forward-facing rear outboard seats thereof are equipped with rear seat lap/shoulder belts of types required to be installed at the time of manufacture by the federal Department of Transportation.
No truck, multi-purpose vehicle, or bus, except school buses and motor homes, with a gross vehicle weight rating of 10,000 pounds or less, registered in the Commonwealth and manufactured on or after September 1, 1991, shall be operated on the highways in the Commonwealth unless the forward-facing rear outboard seats thereof are equipped with rear seat lap/shoulder belts of types required to be installed at the time of manufacture by the federal Department of Transportation.
Passenger cars, trucks, multipurpose vehicles, and buses, except school buses and motor homes, registered in the Commonwealth and manufactured on or after September 1, 1992, shall not be operated on the highways of the Commonwealth unless equipped with rear seat lap/shoulder belts of types required to be installed at the time of manufacture by the federal Department of Transportation for each forward-facing rear outboard seating position on a readily removable seat.
For the purposes of this section, forward-facing rear outboard seats are defined as those designated seating positions for passengers in outside front facing seats behind the driver and front passenger seats, except any designated seating position adjacent to a walkway that is located between the seat and the near side of the vehicle and is designed to allow access to a more rearward seating position.
The Superintendent of State Police shall include in the Official Motor Vehicle Inspection Regulations a section which identifies each classification of motor vehicle required to be equipped with any of the devices described in the foregoing provisions of this section.
Such regulations shall also include a listing of the exact devices which are required to be installed in each motor vehicle classification and the model year of each motor vehicle classification on which the standards of the federal Department of Transportation first became applicable.
1962, c. 357, § 46.1-309.1; 1964, c. 334; 1966, c. 37; 1968, c. 171; 1970, c. 19; 1980, c. 486; 1982, c. 434; 1989, c. 727; 1992, c. 553; 2014, cc. 53, 256.
Source: official Virginia text · Last verified 2026-08-27
Frequently Asked Questions About Virginia § 46.2-1092
What does Code of Virginia § 46.2-1092 cover?
Section 46.2-1092 ("Safety lap belts or a combination of lap belts and shoulder harnesses to be installed in certain motor vehicles") is part of the Code of Virginia, the codified statutory law of Virginia. It sets out the legal rule or procedure described in the text above. Statutes are amended regularly, so always verify against the official source.
How do I cite Virginia § 46.2-1092?
A common citation format is "Code of Virginia § 46.2-1092" (Virginia). Legal writing may require the code abbreviation, section number, and year or edition. Match the style required by your court, professor, or publisher.
Is this the official text of Virginia law?
No. This page is for research and education and may not include the most recent amendments. For official current law, check the Virginia official source linked on this page or consult a licensed Virginia attorney.
How does Virginia § 46.2-1092 apply to my situation?
Statutes are interpreted in context, and application depends on your specific facts. Only a licensed attorney in Virginia can advise on how this section applies to you. Contact your state or local bar association for a referral.
Sources & Verification
Not legal advice. Verify against the official source and consult a licensed attorney in Virginia.