Utah § 6a-1629 - Vehicles subject to Sections 41-6a-1629 through 41-6a-1633 -- Definitions.
Full text of Utah Utah Code § 6a-1629 — Vehicles subject to Sections 41-6a-1629 through 41-6a-1633 -- Definitions., with citation guidance and answers to common questions.
§ 6a-1629. Vehicles subject to Sections 41-6a-1629 through 41-6a-1633 -- Definitions.
Effective 5/6/2026 41-6a-1629.
Vehicles subject to Sections 41-6a-1629 through 41-6a-1633 -- Definitions.
"Frame" means the main longitudinal structural members of the chassis of the vehicle or, for vehicles with unitized body construction, the lowest longitudinal structural member of the body of the vehicle.
(b)
"Frame height" means the vertical distance between the ground and the lowest point on the frame, measured when the vehicle is unladen and on a level surface.
(c)
"Gross vehicle weight rating" means the same as that term is defined in Section 59-2-102.
(d)
"Manufacturer" means any person engaged in manufacturing or assembling new motor vehicles utilizing new parts or components, or a person defined as a manufacturer in current applicable Federal Motor Vehicle Safety Standards and Regulations.
(e)
"Mechanical alteration" or "mechanical lift" means modification or alteration of the axles, chassis, suspension, or body by any means, including tires and wheels, and excluding any load, which affects the frame height of the motor vehicle.
(f)
"O.E.M." means original equipment manufacturer.
(g)
"Original equipment" means an item of motor vehicle equipment, including tires, which were installed in or on a motor vehicle or available as an option for the particular vehicle from the original manufacturer at the time of its delivery to the first purchaser.
(h)
(i)
"Wheel track" means the shortest distance between the center of the tire treads on the same axle. On vehicles having dissimilar axle widths, the axle with the widest distance is used for all calculations.
(ii)
"Wheel track" on a vehicle having dissimilar axle widths, means the shortest distance between the center of the tire treads on the same axle measured on the axle with the widest distance.
(2)
(a)
Except as provided in Subsections (2)(b) and (c), the provisions of Sections 41-6a-1629 through 41-6a-1633 apply to all motor vehicles operated or parked on a highway.
(b)
The provisions of Sections 41-6a-1629 through 41-6a-1633 do not apply to the following vehicles:
(i)
implements of husbandry;
(ii)
farm tractors;
(iii)
road machinery;
(iv)
road rollers; and
(v)
historical vehicles or horseless carriages that have been restored as near to original condition as is reasonably possible.
(c)
The provisions of Subsection 41-6a-1631(2) and Sections 41-6a-1632 and 41-6a-1633 do not apply to a street-legal all-terrain vehicle or a street-legal novel vehicle operated in accordance with Section 41-6a-1509.
Section 6a-1629 ("Vehicles subject to Sections 41-6a-1629 through 41-6a-1633 -- Definitions.") is part of the Utah Code, the codified statutory law of Utah. It sets out the legal rule or procedure described in the text above. Statutes are amended regularly, so always verify against the official source.
How do I cite Utah § 6a-1629?
A common citation format is "Utah Code § 6a-1629" (Utah). Legal writing may require the code abbreviation, section number, and year or edition. Match the style required by your court, professor, or publisher.
Is this the official text of Utah law?
No. This page is for research and education and may not include the most recent amendments. For official current law, check the Utah official source linked on this page or consult a licensed Utah attorney.
How does Utah § 6a-1629 apply to my situation?
Statutes are interpreted in context, and application depends on your specific facts. Only a licensed attorney in Utah can advise on how this section applies to you. Contact your state or local bar association for a referral.
