Us Code § 20169 - Speed limit action plans
Full text of Us Code United States Code § 20169 — Speed limit action plans, with citation guidance and answers to common questions.
§ 20169. Speed limit action plans
(a)
(b)
(1) identifies each main track location where there is a reduction of more than 20 miles per hour from the approach speed to a curve, bridge, or tunnel and the maximum authorized operating speed for passenger trains at that curve, bridge, or tunnel;
(2) describes appropriate actions to enable warning and enforcement of the maximum authorized speed for passenger trains at each location identified under paragraph (1), including—
(A) modification to automatic train control systems, if applicable, or other signal systems;
(B) increased crew size;
(C) installation of signage alerting train crews of the maximum authorized speed for passenger trains in each location identified under paragraph (1);
(D) installation of alerters;
(E) increased crew communication; and
(F) other practices;
(3) contains milestones and target dates for implementing each appropriate action described under paragraph (2); and
(4) ensures compliance with the maximum authorized speed at each location identified under paragraph (1).
(c)
(d)
(1) not later than 1 year after the date of enactment of the Passenger Rail Expansion and Rail Safety Act of 2021, and annually thereafter, review such plan to ensure the effectiveness of actions taken to enable warning and enforcement of the maximum authorized speed for passenger trains at each location identified pursuant to subsection (b)(1); and
(2) not later than 90 days before implementing any significant operational or territorial operating change, including initiating a new service or route, submit to the Secretary a revised action plan, after consultation with any applicable host railroad, that addresses such operational or territorial operating change.
(e)
(1) survey its routes pursuant to subsection (a) not later than 90 days after the date of enactment of the Passenger Rail Expansion and Rail Safety Act of 2021; and
(2) develop an action plan pursuant to subsection (b) not later than 120 days after the date on which such survey is complete.
(f)
(g)
(h)
(Added Pub. L. 117–58, div. B, title II, §22415(a), Nov. 15, 2021, 135 Stat. 746.)
Editorial Notes
References in Text
The date of enactment of the Passenger Rail Expansion and Rail Safety Act of 2021, referred to in subsecs. (d)(1) and (e)(1), is the date of enactment of title II of div. B of Pub. L. 117–58, which was approved Nov. 15, 2021.
The date of enactment of the FAST Act, referred in subsec. (e), is the date of enactment of Pub. L. 114–94, which was approved Dec. 4, 2015.
About This Section
49 U.S.C. § 20169 is part of Title 49 of the United States Code. The United States Code is the official codification of federal statutes maintained by the Office of the Law Revision Counsel of the U.S. House of Representatives. Congress amends the Code through new public laws, which are eventually incorporated into the relevant title.
This section may be cited in legal writing as 49 U.S.C. § 20169. For the most current official text, including any recent amendments, use the official source links below. Do not rely on this page as the sole authority for legal citation or litigation.
How to Read This Statute
Statutes are organized by title, chapter, section, and subsection. Pay attention to words like "shall," "may," "and," and "or," because they determine whether a requirement is mandatory or permissive and whether multiple conditions must all be met. Historical notes and amendments often appear at the end of a section.
Using This Page
This page is intended for research and educational use. Lawyers, students, journalists, and compliance professionals can use it as a starting point, but should always verify the current text through an official government source before relying on it for legal advice, filings, or compliance decisions.