Us Code § 16298b - High efficiency turbines
Full text of Us Code United States Code § 16298b — High efficiency turbines, with citation guidance and answers to common questions.
§ 16298b. High efficiency turbines
(a) In general
The Secretary, acting through the Assistant Secretary for Fossil Energy (referred to in this section as the "Secretary"), shall establish a multiyear, multiphase program (referred to in this section as the "program") of research, development, and technology demonstration to improve the efficiency of gas turbines used in power generation systems and aviation.
(b) Program elements
The program shall—
(1) support first-of-a-kind engineering and detailed gas turbine design for small-scale and utility-scale electric power generation, including—
(A) high temperature materials, including superalloys, coatings, and ceramics;
(B) improved heat transfer capability;
(C) manufacturing technology required to construct complex 3-dimensional geometry parts with improved aerodynamic capability;
(D) combustion technology to produce higher firing temperature while lowering nitrogen oxide and carbon monoxide emissions per unit of output;
(E) advanced controls and systems integration;
(F) advanced high performance compressor technology; and
(G) validation facilities for the testing of components and subsystems;
(2) include technology demonstration through component testing, subscale testing, and full-scale testing in existing fleets;
(3) include field demonstrations of the developed technology elements to demonstrate technical and economic feasibility;
(4) assess overall combined cycle and simple cycle system performance;
(5) increase fuel flexibility by enabling gas turbines to operate with high proportions of, or pure, hydrogen or other renewable gas fuels;
(6) enhance foundational knowledge needed for low-emission combustion systems that can work in high-pressure, high-temperature environments required for high-efficiency cycles;
(7) increase operational flexibility by reducing turbine start-up times and improving the ability to accommodate flexible power demand; and
(8) include any other elements necessary to achieve the goals described in subsection (c), as determined by the Secretary, in consultation with private industry.
(c) Program goals
(1) In general
The goals of the program shall be—
(A) in phase I, to develop a conceptual design of, and to develop and demonstrate the technology required for—
(i) advanced high efficiency gas turbines to achieve, on a lower heating value basis—
(I) a combined cycle efficiency of not less than 65 percent; or
(II) a simple cycle efficiency of not less than 47 percent; and
(ii) aviation gas turbines to achieve a 25 percent reduction in fuel burn by improving fuel efficiency to existing best-in-class turbo-fan engines; and
(B) in phase II, to develop a conceptual design of advanced high efficiency gas turbines that can achieve, on a lower heating value basis—
(i) a combined cycle efficiency of not less than 67 percent; or
(ii) a simple cycle efficiency of not less than 50 percent.
(2) Additional goals
If a goal described in paragraph (1) has been achieved, the Secretary, in consultation with private industry and the National Academy of Sciences, may develop additional goals or phases for advanced gas turbine research and development.
(d) Financial assistance
(1) In general
The Secretary may provide financial assistance, including grants, to carry out the program.
(2) Proposals
Not later than 180 days after December 27, 2020, the Secretary shall solicit proposals from industry, small businesses, universities, and other appropriate parties for conducting activities under this section.
(3) Considerations
In selecting proposed projects to receive financial assistance under this subsection, the Secretary shall give special consideration to the extent to which the proposed project will—
(A) stimulate the creation or increased retention of jobs in the United States; and
(B) promote and enhance technology leadership in the United States.
(4) Competitive awards
The Secretary shall provide financial assistance under this subsection on a competitive basis, with an emphasis on technical merit.
(5) Cost sharing
Financial assistance provided under this subsection shall be subject to the cost sharing requirements of section 16352 of this title.
(e) Authorization of appropriations
There is authorized to be appropriated to carry out this section $50,000,000 for each of fiscal years 2021 through 2025.
(Pub. L. 109–58, title IX, §969B, as added Pub. L. 116–260, div. Z, title IV, §4005(a), Dec. 27, 2020, 134 Stat. 2542.)
About This Section
42 U.S.C. § 16298b is part of Title 42 of the United States Code. The United States Code is the official codification of federal statutes maintained by the Office of the Law Revision Counsel of the U.S. House of Representatives. Congress amends the Code through new public laws, which are eventually incorporated into the relevant title.
This section may be cited in legal writing as 42 U.S.C. § 16298b. For the most current official text, including any recent amendments, use the official source links below. Do not rely on this page as the sole authority for legal citation or litigation.
How to Read This Statute
Statutes are organized by title, chapter, section, and subsection. Pay attention to words like "shall," "may," "and," and "or," because they determine whether a requirement is mandatory or permissive and whether multiple conditions must all be met. Historical notes and amendments often appear at the end of a section.
Using This Page
This page is intended for research and educational use. Lawyers, students, journalists, and compliance professionals can use it as a starting point, but should always verify the current text through an official government source before relying on it for legal advice, filings, or compliance decisions.