Tennessee § 65-6-204 - Side clearance.
Full text of Tennessee Tennessee Code Annotated § 65-6-204 — Side clearance., with citation guidance and answers to common questions.
§ 65-6-204. Side clearance.
The minimum side clearance from center line of standard gauge railroad tracks which are used or purported to be used for transporting freight cars, except as prescribed in this section, shall be as follows: All structures and obstructions, except as specifically mentioned in this section, eight feet (8'); All posts, pipes, crossing signals, and similar obstructions, eight feet (8'); Platforms eight inches (8") or less above top of rail, four feet (4') and eight inches (8"); Platforms four feet (4') or less above top of rail, seven feet (7') and six inches (6"), except platforms of railroad freight warehouse stations and freight transfer points, which shall have a clearance of not less than five feet (5') and nine inches (9"); Platforms more than four feet (4') above top of rail used principally for loading and unloading refrigerator cars, eight feet (8'); Switch boxes, switch operating mechanisms, and accessories necessary for the control and operation of signals and interlockers, projecting four inches (4") or less above top of rail, three feet (3'); Low switch stands, dwarf signal stands and derail stands at center line of stand, six and one-half feet (6½'); All structural parts of railroad bridges shall have clearances which conform to the recommendation of the A.R.E.A. in effect when construction is begun; The side clearances specified in this section shall not apply to mail cranes during such times as the arms of such cranes are supporting mail sacks for delivery; provided, that the top arm is not lower than ten feet (10') and eight inches (8") above top of rail and neither arm extends within six feet (6') and five inches (5") from the center line of track; Icing platforms, seven feet (7'); and All minimum side clearances prescribed in this section are for tangent tracks. All structures adjacent to curve tracks shall have an additional minimum side clearance compensated for the curvature. Structures constructed prior to April 13, 1949, may be maintained at such clearance as was lawful at the time of construction. Acts 1949, ch. 178, § 4; C. Supp. 1950, § 2670.4; Acts 1951, ch. 144, § 1; T.C.A. (orig. ed.), § 65-626.
Frequently Asked Questions About Tennessee § 65-6-204
What does Tennessee Code Annotated § 65-6-204 cover?
Section 65-6-204 ("Side clearance.") is part of the Tennessee Code Annotated, the codified statutory law of Tennessee. It sets out the legal rule or procedure described in the text above. Statutes are amended regularly, so always verify against the official source.
How do I cite Tennessee § 65-6-204?
A common citation format is "Tennessee Code Annotated § 65-6-204" (Tennessee). Legal writing may require the code abbreviation, section number, and year or edition. Match the style required by your court, professor, or publisher.
Is this the official text of Tennessee law?
No. This page is for research and education and may not include the most recent amendments. For official current law, check the Tennessee official source linked on this page or consult a licensed Tennessee attorney.
How does Tennessee § 65-6-204 apply to my situation?
Statutes are interpreted in context, and application depends on your specific facts. Only a licensed attorney in Tennessee can advise on how this section applies to you. Contact your state or local bar association for a referral.
Sources & Verification
Not legal advice. Verify against the official source and consult a licensed attorney in Tennessee.