Maine § 1764. - Life-cycle costs

§ 1764.. Life-cycle costs

1.  Bureau of General Services to adopt rules and procedures.  The Bureau of General Services shall adopt rules, including energy conservation guidelines that conform at a minimum to the energy efficiency building performance standards adopted by the Department of Public Safety for conducting an energy-related life-cycle costs analysis of alternative architectural or engineering designs, or both, and shall evaluate the efficiency of energy utilization for designs in the construction and lease of public improvements and public school facilities.

2.  Life-cycle costs.  Any life-cycle costs must include:

A. The reasonably expected energy costs over the life of the building, as determined by the designer, that are required to maintain illumination, power, temperature, humidity and ventilation and all other energy-consuming equipment in a facility;   [PL 1997, c. 541, §2 (AMD).]

B. The reasonable energy-related costs of probable maintenance, including labor and materials and operation of the building, replacement costs over the expected life of the facility and any other ownership cost issues identified by the Bureau of General Services; and   [PL 1997, c. 541, §2 (AMD).]

C. A comparison of energy-related and economic-related design alternatives. The Bureau of General Services may direct the designer to select, include and develop life-cycle costs for any viable alternatives that should be considered.   [PL 1997, c. 541, §2 (NEW).]

3.  Determination of life-cycle costs.  To determine the life-cycle costs, the Bureau of General Services shall adopt rules that include but are not limited to:

A. The orientation and integration of the facility with respect to its physical site;   [PL 1977, c. 563, §2 (RPR).]

B. The amount and type of glass employed in the facility and the directions of exposure;   [PL 1977, c. 563, §2 (RPR).]

C. The effect of insulation incorporated into the facility design and the effect on solar utilization to the properties of external surfaces;   [PL 1977, c. 563, §2 (RPR).]

D. The variable occupancy and operating conditions of the facility and subportions of the facility;   [PL 2007, c. 671, §1 (AMD).]

E. Energy consumption analysis of the major equipment of the facility's heating, ventilating and cooling system, lighting system, hot water system and all other major energy-consuming equipment and systems as appropriate. This analysis must include: