Kansas § 8-1806 - Road-lighting equipment on motor-driven cycles. The head lamp or head lamps upon every motor-driven cycle may be of the single-beam or mult

§ 8-1806. Road-lighting equipment on motor-driven cycles. The head lamp or head lamps upon every motor-driven cycle may be of the single-beam or mult

8-1806. Road-lighting equipment on motor-driven cycles. The head lamp or head lamps upon every motor-driven cycle may be of the single-beam or multiple-beam type, but in either event shall comply with the requirements and limitations as follows:(a) Every such head lamp or head lamps on a motor-driven cycle shall be of sufficient intensity to reveal persons and vehicles at a distance of not less than one hundred (100) feet when the motor-driven cycle is operated at any speed less than twenty-five (25) miles per hour, and at a distance of not less than two hundred (200) feet when the motor-driven cycle is operated at a speed of twenty-five (25) or more miles per hour, and at a distance of not less than three hundred (300) feet when the motor-driven cycle is operated at a speed of thirty-five (35) or more miles per hour.(b) In the event the motor-driven cycle is equipped with a multiple-beam head lamp or head lamps, such equipment shall comply with the requirements of K.S.A. 8-1805.(c) In the event the motor-driven cycle is equipped with a single-beam lamp or lamps, such lamp or lamps shall be so aimed that when the vehicle is loaded none of the high intensity portion of light, at a distance of twenty-five (25) feet ahead, shall project higher than the level of the center of the lamp from which it comes.History: L. 1974, ch. 33, § 8-1806; July 1.