Arkansas § 15-21-306 - Technical definition of system — Marking of coordinates on ground.
Full text of Arkansas Arkansas Code of 1987 Annotated § 15-21-306 — Technical definition of system — Marking of coordinates on ground., with citation guidance and answers to common questions.
§ 15-21-306. Technical definition of system — Marking of coordinates on ground.
For purposes of more precisely defining the Arkansas Coordinate System 1983, the following definition by the National Geodetic Survey is adopted: The Arkansas Coordinate System 1983, North Zone, is a Lambert conformal projection of the North American Datum of 1983 (NAD83), having standard parallels at north latitudes of thirty-four degrees fifty-six minutes (34° 56' north) and thirty-six degrees fourteen minutes (36° 14' north), along which parallels the scale shall be exact. The origin of coordinates is at the intersection of the meridian ninety-two degrees zero minutes west of Greenwich (92° 00' west) and the parallel thirty-four degrees twenty minutes north latitude (34° 20' north). This origin is given the coordinates: East equals four hundred thousand meters (400,000 m.) and north equals zero meters (0.0 m.); and The Arkansas Coordinate System 1983, South Zone, is a Lambert conformal projection of the North American Datum of 1983 (NAD83), having standard parallels at north latitudes of thirty-three degrees eighteen minutes (33° 18' north) and thirty-four degrees forty minutes (34° 40' north), along which parallels the scale shall be exact. The origin of coordinates is at the intersection of the meridian ninety-two degrees zero minutes west of Greenwich (92° 0' west) and the parallel thirty-two degrees forty minutes north latitude (32° 40' north). This origin is given the coordinates: East equals four hundred thousand meters (400,000 m.) and north equals four hundred thousand meters (400,000 m.). The position of Arkansas Coordinate System 1983 shall be marked on the ground by triangulation or traverse stations established in conformity with standards adopted by the National Geodetic Survey for first-order and second-order work, whose geodetic positions have been rigidly adjusted on the North American Datum of 1983 and whose coordinates have been computed on the system herein defined. Any such station may be used for establishing a survey connection with the Arkansas Coordinate System 1983.
Source: official Arkansas text · Last verified 2026-08-27
Frequently Asked Questions About Arkansas § 15-21-306
What does Arkansas Code of 1987 Annotated § 15-21-306 cover?
Section 15-21-306 ("Technical definition of system — Marking of coordinates on ground.") is part of the Arkansas Code of 1987 Annotated, the codified statutory law of Arkansas. It sets out the legal rule or procedure described in the text above. Statutes are amended regularly, so always verify against the official source.
How do I cite Arkansas § 15-21-306?
A common citation format is "Arkansas Code of 1987 Annotated § 15-21-306" (Arkansas). Legal writing may require the code abbreviation, section number, and year or edition. Match the style required by your court, professor, or publisher.
Is this the official text of Arkansas law?
No. This page is for research and education and may not include the most recent amendments. For official current law, check the Arkansas official source linked on this page or consult a licensed Arkansas attorney.
How does Arkansas § 15-21-306 apply to my situation?
Statutes are interpreted in context, and application depends on your specific facts. Only a licensed attorney in Arkansas can advise on how this section applies to you. Contact your state or local bar association for a referral.
Sources & Verification
Not legal advice. Verify against the official source and consult a licensed attorney in Arkansas.